BinMaster’s Procap capacitance probe with a flexible, extendable cable is designed for high-, mid- or low-level detection when the capacitance probe must be mounted on the top of the bin. This flexible probe is claimed to be ideal for applications where a probe is used as a high-level alarm or must be extended more than 4 ft. It can be used with any lump material that might bend, damage or break a rigid probe, and is configured so the first 10 in. of the probe are rigid and the rest of the probe is flexible. The flexible 1/4-in.-diameter cable can be any desired length up to a 35-ft maximum extension, which is sensitive to the end of cable when uncovered. For convenience and ease of installation, the cable can be cut to the desired length in the field. The flexible probe operates below the RF range and won’t interfere with or be affected by other electronic equipment. A visual LED on the top of the unit indicates sensor status of covered, uncovered or a failed condition. Hazardous location approval is standard, so it is appropriate for a wide range of applications. When used with BinMaster’s point level alarm panel, up to 24 probes can be monitored from a single location.