Industrial material handling equipment such as wheel loaders and forklifts are typically intended for short life cycles due to the severe environments in which they must work. Metal smelters, for example, have extreme temperatures and corrosive elements that take a heavy toll on machinery.

For the toughest industrial jobs from mining to steel mills, severe-duty grade loaders outperform commercial loaders, according to Waldon Equipment.
For the toughest industrial jobs from mining to steel mills, severe-duty grade loaders outperform commercial loaders, according to Waldon Equipment.

With many facilities running continuous multi-shift schedules, light-duty, commercial-grade material handling equipment wears out prematurely. This is because much of today’s industrial equipment is not actually “industrial grade,” but commercial-grade, light-duty equipment intended for farming, landscaping or construction that has been repurposed for industrial use.

“If you need material handling equipment that will last and don’t want to keep taking it out of service to repair or replace it, look to severe-duty industrial equipment,” said Bill Barns, a project manager at Langeloth Metallurgical Co. (LMC), one of the world’s largest ferromolybdenum producers, and the first site to commercially convert molybdenite concentrates to technical molybdic oxide. “If it’s built to last like our severe-duty wheel loaders, you’ll put it to work and not worry about much other than routine maintenance.”

At LMC’s Langeloth, Pennsylvania, USA, plant, six furnaces called “roasters” can operate at temperatures up to 1,400°F. To keep the plant operating 24/7 year-round, a fleet of wheel loaders must continuously scoop up ore concentrate and dump it into the feed hoppers of the roasters.

“Our Waldon 4500B loaders have to feed the roasters continuously, without fail,” said Barns. “Light-duty, commercial equipment cannot reliably do that because they’re not intended for hard 24/7 industrial use in confined areas.”

A growing number of managers in harsh industrial environments like Barns’ are finding that by lengthening the life of material handling equipment and increasing its reliability with severe-duty designs specifically intended for industrial use, they can reduce capital costs and improve production. This approach not only can eliminate premature equipment repair and replacement costs but also minimize production downtime due to unscheduled equipment breakdown.

While ordinary soil weighs about 60-80 lb/ft3, LMC’s material weighs about 150 lb, according to Barns. “With our heavy loads and continuous use, we’re putting more stress on the frames,” he said. “If we used light-duty, commercial equipment, we would be breaking a lot of lift cylinders and main frames.”

“When a vendor brought some light-duty, commercial loaders for us to try out, our operators looked at them and said, ‘They won’t last a week,’” said Barns. “The minute we saw them, we knew they would require excessive repair, and we can’t afford the downtime or early replacement.”

“We rely on Waldon front-end loaders because they can take abuse and keep performing,” said Barns. “We typically get about five to seven years of continuous 24/7 use out of them before we resell them for light-duty, commercial work. They’re virtually indestructible and require little other than routine maintenance.”

Fairview, Oklahoma-based Waldon Equipment, a manufacturer of heavy-duty industrial loaders, lift trucks, forklift attachments, and a mini backhoe, has specialized in material handling equipment for harsh environments for more than 45 years.

According to Barns, when compared with typical commercial loaders, LMC’s loaders’ extra heavy-duty frames, 2-in-thick articulating frame plates, and simple drive train contribute to their longevity in a tough industrial environment. “Our fleet of seven severe-duty loaders does the work of a least 10 to 12 light-duty, commercial loaders because we would probably need that many light-duty units to keep our roasters reliably fed.”

But space restrictions within the plant building—which was built almost a century ago with low ceilings, multiple columns and narrow access points—make having compact, low-profile loaders capable of tight turns and fitting into a maintenance elevator a must.

“Since light-duty, commercial loaders are typically made for outdoor use with higher cabs, bigger tires and bodies, many wouldn’t clear our ceiling or fit in a maintenance elevator without lengthy disassembly,” said Barns. “With our roasters’ feed bins in different positions, there’s also a need for better maneuverability than they can provide.”

According to Barns, even skid steer loaders—known for their small size—lack desired maneuverability in this setting. This is because their fixed frames do not turn quickly, and their wheels tend to lock up and skid, which is less than ideal for maneuvering in confined spaces.

Because the severe-duty loaders are low profile with articulated frames, however, they have more ceiling clearance and a lower center of gravity than typical light-duty, commercial loaders or skid steers, which improves their turning and maneuverability, according to Barns. “The Waldon loaders put operators closer to what they’re scooping,” he said. “Since they steer like a car, they can articulate around corners and between columns with greater control and safety than typical joystick-style controls allow.”

The four-wheel drive Waldon loaders also provide better traction than two-wheel drive loaders. In fact, they have been the only loaders that are compact and maneuverable enough for operators to drive on and off LMC maintenance elevators without delay, said Barns.

In the end, however, Barns concludes that the choice between light-duty commercial equipment and severe-duty industrial equipment should be easy for production or operations managers to make, as it all comes down to longevity and reliability.

This article was provided by Waldon Equipment, 201 W. Oklahoma Ave., Fairview, OK,  73737; telephone: 866-283-2759; www.waldonequipment.com.

Resource Center Whitepapers, Videos, Case Studies

Let's stay in touch!

All of the latest mining news and our digital edition sent to your inbox once a week.

We'll never share your email address, and you can opt out at any time, we promise.