Flexco offers new Flex-Lag Medium Ceramic pulley lagging and Flex-Lag Adhesives. The ceramic pulley lagging features 39% tile coverage, which complements the existing Full Ceramic and Diamond Ceramic that provide 80% and 15% coverage, respectively. Adhesives, with a two-part cold-bond system, round out the new Flexco offering by providing the bonding system to complete the lagging installation. Flex-Lag Medium Ceramic pulley lagging can be used in dry, wet or muddy applications where slippage can occur, while also offering the excellent wear life of ceramic tiles at an affordable cost. Horizontal grooves in the lagging trap and deflect water/debris, and molded ceramic buttons grip the belt’s underside for positive traction. The lagging comes in strip widths ranging from 35–101 in. (880–2,560 mm) to match pulley face widths or 18–84 in. (450–2,100 mm) to match belt widths. The lagging works with pulley diameters more than 12.6 in. (320 mm) and is also available in SBR or FRAS (Fire Resistant Anti Static) rubber. Flex-Lag Adhesives provide an excellent bond for rubber-to-rubber and rubber-to-metal installations. The primer features a neoprene additive to enhance bonding strength when paired with the adhesive. Flex-Lag Adhesives are also environmentally friendly, comprised of a polychloroprene rubber in a solvent base that is free of chlorinated hydrocarbons.